Operating Modes; Factory Reset; Pinpoint - Fisher F44 Owner's Manual

Continued)
MENU
There are four discrimination modes: JEWELRY, COIN, ARTIFACT and
OPER TING MODES
CUSTOM, and ALL METAL (A/M) mode. JEWELRY and COIN modes have
preset notch settings.
You can change all 9
target category notch
settings in all
discrimination
and these changes will
be saved on shutdown.
Pressing the MODE
button will cycle through
the modes. The active
Mode will have bold
text. Use NOTCH to
change discrimination
settings in each mode.
The NOTCH function
does not work in All
Metal mode.
JEWELRY Mode preset NOTCH: Fe (Iron) category notched out.
COIN Mode preset NOTCH: Fe (Iron) and Target Category groups 2 (Foil) and 4
(Aluminum) notched out.
ARTIFACT Mode: All Target Categories enabled.
CUSTOM Mode: User definable.
To reset your F44 to the default factory settings:
F CTORY RESET
1. Turn the detector off.
2. Hold the MENU button down while pressing the Power button.
NOTE: This reset will erase any custom tone settings you may have entered
in the Custom Mode.
Press and hold

PINPOINT

searchcoil over a metal target will induce sound.
Audio is V.C.O. The 2-digit number displayed indicates target depth, in inches.
The scale is calibrated to coin-sized objects.
four
modes
to activate. Searchcoil motion is not required; a motionless
15