Table of Contents
Advertisement
Advanced 1 Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down
in the Advanced 1 menu. Press ◄► to enter and change values for setting.
I
TEM
Press the cursor ◄► button to enter and select different OSD location.
Menu Position
Press the cursor ◄► button to enter and select OSD background translucent level.
Translucent Menu
Press the cursor ◄► button to enter and turn Low Power Mode on or off.
Low Power Mode
Press the cursor ◄► button to enter and toggle between Normal and High fan
speeds.
Fan Speed
Note: We recommend selecting high speed in high temperatures, high humidity, or
high altitude (higher than 1500m/4921ft) areas.
After replacing the lamp, this item should be reset. See page
Lamp Hour Reset
on
Press the cursor ◄► button to enter and adjust a two digit projector ID from 00
Projector ID
through 98.
Press
Network
on
Lamp Hour
Reset.
(Enter) / ► to enter the Network menu. See page
Network
.
D
ESCRIPTION
– 35 –
36
for more information
36
for more information
Advertisement
Table of Contents
