Panasonic LUMIX DMC-G7 Owner's Manual For Advanced Features page 93

3. Recording Modes
Program Shift
In Program AE Mode, you can change the preset aperture value and shutter speed without
changing the exposure. This is called Program Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Program AE Mode.
1
Press the shutter button halfway and display the aperture value and shutter
speed value on the screen.
2
While the values are displayed (about 10 seconds),
perform Program Shift by rotating the rear dial or
front dial.
A Program Shift indication
•
To cancel Program Shift, turn off this unit or rotate the
front/rear dial until the Program Shift indication disappears.
Program Shift can easily be canceled by setting a function button to [One Push AE].
(P101)
Displaying/not displaying the exposure meter
> [Custom] > [Expo.Meter] > [ON]/[OFF]
MENU
B Exposure meter
•
Set to [ON] to display the Exposure meter when performing
Program Shift, setting aperture, and setting shutter speed.
•
Unsuitable areas of the range are displayed in red.
•
When the Exposure meter is not displayed, switch the display
information for screen by pressing [DISP.].
•
If no operations are performed for approximately 4 seconds, the Exposure meter disappears.
(P51)
93
SS SS SS
250 125 60 30 15
F F
4.0 5.6 8.0
0
4.0 4.0 4.0 60 60 60 2
00
A
SS SS SS
250 125 60 30 15
F F
4.0 5.6 8.0
0
4.0 4.0 4.0 60 60 60 2
00
B
98 98 98
98 98 98