Panasonic LUMIX DMC-G7 Owner's Manual For Advanced Features page 166

5. Focus and Brightness (Exposure) Settings
•
You can also enlarge the area by rotating the focus ring, moving the focus lever, or
pinching out
•
You can also adjust the focus position by dragging
•
Pressing [DISP.] resets the focus position back to the center.
4
Adjust the focus.
A Indicator for ¶ (infinity)
B MF Assist (enlarged screen)
C Peaking
D MF Guide
•
The in-focus portions will be highlighted. (Peaking)
•
You can check whether the point of focus is to the near
side or to the far side. (MF Guide)
You can perform the following operations:
Button operation Touch operation
3/4/2/1
s
[DISP.] ¢
¢ When using an interchangeable lens with no focus ring, you can perform these operations
after pressing 4 to display the screen that lets you set the area to be enlarged.
•
When the picture is displayed in windowed mode, you can enlarge/reduce the picture by
approximately 3 to 6
reduce the picture by approximately 3 to 10
•
If you use the HDMI output during recording, the screen cannot be enlarged in
windowed mode.
Changing the display of the MF Assist
> [Custom] > [MF Assist Display]
MENU
[FULL]: Enlarges the display in full screen.
[PIP]: Enlarges the display in a window on the screen.
•
The display of the assist screen can also be switched by touching [
adjustment screen.
(P59) the screen or touching the screen twice.
¢ Dragging
Pinching out/in Enlarges/reduces the screen in small steps.
s
[Reset] ¢
k ; when the picture is displayed in full screen, you can enlarge/
(P59) the screen.
Description of operation
Moves the enlarged area
Enlarges/reduces the screen in large steps.
Switches the enlarged display (windowed/full
screen)
Resets the area to be enlarged back to the
center.
k .
166
B C
AF
D
A
] on the focus