Panasonic LUMIX DMC-G7 Owner's Manual For Advanced Features page 49

2. Getting Started/Basic Operations
3
Press [MENU/SET] and set.
•
When the recording screen is displayed, the original assignment settings for the dials are
restored.
•
You can also complete this step by performing either of the operations below:
–
Press the shutter button halfway
–
Press [Fn11]
•
Items that are temporarily assigned to the front/rear dials can be used only while the guide
1
(step ) or setting screen (step
while making adjustments, the original assignment settings will be restored.
Setting the operation methods of the front dial and rear dial
> [Custom] > [Dial Set.]
MENU
Item
[Assign Dial (F/SS)]
[Rotation (F/SS)]
[Exposure Comp.]
[Dial Operation Switch
Setup]
2
) is displayed. If you display a menu or turn off the camera
Description of settings
Assigns the operations of the aperture value and shutter speed
in Manual Exposure Mode.
[ F SS]:
Assigns the aperture value to the front dial, and the shutter
speed to the rear dial.
[ SS F]:
Assigns the shutter speed to the front dial, and the aperture
value to the rear dial.
Changes the rotation direction of the dials for adjusting the
aperture value and shutter speed.
[ ]/[
Assigns the Exposure Compensation to the front dial or rear
dial so that you can directly adjust it.
[ ] (Front Dial)/[
Sets the items to be assigned temporarily to the front/rear dials
when you press the function button to which [Dial Operation
Switch] is assigned.
[ ] ([Front dial operation])/[
•
Items that can be set are as follows.
–
[Sensitivity] (P175)
–
[White Balance] (P136)
–
[AF Mode/MF] (P151)
–
[Photo Style] (P130)
–
[Filter Select] (P115,
–
[Aspect Ratio] (P140)
•
[Highlight Shadow] uses the two dials. It will be automatically
assigned to both of the dials when you assign it to either of
them.
49
]
] (Rear Dial)/[OFF]
] ([Rear dial operation])
–
[4K PHOTO]
–
[Highlight Shadow]
–
[i.Dynamic]
–
[i.Resolution]
–
[Flash Mode]
132)
–
[Flash Adjust.]
(P185)
(P135)
(P143)
(P143)
(P234)
(P237)