Panasonic LUMIX DMC-G7 Owner's Manual For Advanced Features page 72

2. Getting Started/Basic Operations
•
Some functions cannot be used depending on the mode or displayed screen.
•
When using [Ex. Tele Conv.] (still pictures), check that [Picture Size] is set to [M] or [S].
•
When set to [Focus Area Set], it is possible to display the position setting screen of either AF
area or MF Assist.
•
Operations of the cursor button and [MENU/SET] are disabled when [Cursor Button Lock] is
set. Press the function button again to enable them.
•
When [Restore to Default] is set, function button settings return to the default configuration.
Not available in these cases:
•
[Fn2] is not available when recording with [
•
[Fn3] cannot be used during Time Lapse Shooting.
•
[Fn4] cannot be used in the following cases.
–
Intelligent Auto Mode
–
Intelligent Auto Plus Mode
–
Creative Control Mode
–
When using [Multi Exp.]
•
[Fn6], [Fn7], [Fn8], [Fn9], and [Fn10] cannot be used when the viewfinder is in use.
Making the function button settings for playback
You can directly set an assigned function to a selected image by pressing the function
button during playback.
•
The following functions can be assigned to the button [Fn1], [Fn2], [Fn5] or [Fn11].
–
[Favorite] (P285): [Fn2]
–
[Print Set] (P286)
–
[Protect] (P287)
¢ Function button settings at the time of purchase.
•
When [Restore to Default] is set, function button settings return to the default configuration.
Using the function buttons during playback
∫
Example: When [Fn2] is set to [Favorite]
1 Press 2/1 to select the picture.
2 Press [Fn2], and then set the image as [Favorite].
•
When assigning [Print Set], set the number of pictures to be
printed next.
•
When assigning [Delete Single], select [Yes] on the
confirmation screen.
[Playback] Menu/Playback functions
¢
72
] ([4K Burst(S/S)]) of 4K Photo.
–
[Delete Single] (P264)
–
[Off]: [Fn1] ¢ /[Fn5]
–
[Restore to Default]
¢ /[Fn11] ¢
1/98 1/98 1/98 1/98