3. Recording Modes
[Sunshine]
Setting the light source
∫
You can change the position and size of the light source.
1
Press [Fn4] to display the setting screen.
•
Setting screen can also be displayed by touching in order of [
2
Press 3/4/2/1 to move the center position of the light source .
•
The position of the light source can also be moved by touching the screen.
•
The center of the light source can be moved to the edge of the screen.
Point for when placing the center of the light
source
A more natural appearance can be created by
placing the center of the light source outside the
image.
3
Adjust the size of the light source by rotating the rear
dial.
•
The display can also be enlarged/reduced by pinching out/pinching in.
•
Pressing [DISP.] will return the light source setting back to the default setting.
4
Press [MENU/SET] to set.
•
Display of the recording screen will be delayed more than usual and the screen will look as if
frames are dropping.
This effect adds a cast of light to the scene.
Items that can be set
Color
•
Select the color tone by rotating the
rear dial, and then press [MENU/SET].
Yellow tone/Red tone/Blue tone/White tone
125
] then [
].