13. Others
The recorded picture is whitish.
•
Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry
cloth.
> Refer to
P403
when the image sensor gets dirty.
The recorded picture is too bright or dark.
•
Check that the exposure is correctly compensated.
•
Is the AE Lock
(P171)
Multiple pictures are taken at one time.
•
Cancel the following settings:
–
Burst/Auto Bracket/[
–
White Balance Bracket
The subject is not focused properly.
•
The subject is beyond the focus range of the camera.
•
There is camera shake (jitter) or the subject is moving slightly.
•
Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]?
•
Is [Shutter AF] in the [Custom] menu set to [OFF]?
•
Is the AF Lock
(P171)
The recorded picture is blurred.
The Optical Image Stabilizer is not effective.
•
The shutter speed will become slower and the Optical Image Stabilizer function may not work
properly when taking pictures especially in dark places.
> We recommend holding the camera firmly with both hands when taking pictures.
> We recommend using a tripod and the self-timer
shutter speed.
•
Are you using a lens which supports the Stabilizer function?
•
When a moving subject is recorded with the electronic shutter, the subject may appear
distorted on the picture.
Taking pictures using White Balance Bracket is not possible.
•
Is there any memory remaining on the card?
applied incorrectly?
] of the self-timer
(P139)
applied incorrectly?
(P179)
(P173)
(P181)
(P44)
(P223)
(P162)
(P201)
when taking pictures with a slow
(P20)
388
(P164)
(P43)