Basic Features; Video/Camera Mode; Mic On/Off - aguri VISION DX10 User Manual

Basic features

.
Your Aguri Vision DX10 DVR comes as standard with all features set to their optimum settings, however the unit has
certain user selectable features you can change to suit your own requirements.
Power on/off
Your DX10 will power on and start to record automatically as soon as it is connected to power. You can also power it on
and off manually. Press the power button for 1 second to power on, press and hold the power button for 2 seconds to
power off.

Video/camera mode

You can use your DX10 to record video and to take 'still' photographs. To switch to camera mode press and hold the
camera button. To switch to video mode, press and hold the video button.
Audible recording (Mic on/off)
When recording video you have a choice of whether you want to have the mic turned on to record audible sounds
within your vehicle or to record video only with no sound. To turn the mic on and off briefly press the SOS/Mic button.
The Mic icon on the LCD display will change to confirm your selection.
Emergency SOS function
If you want to ensure you save and lock a section of video, during an emergency or after an accident for example, press
and hold the Emergency SOS button for 2 seconds. The section of video just recorded will be saved and locked so that
it will not be deleted or automatically over-written from the SD card.
Automatic video and event recording.
Your DX10 DVR has been designed to be as simple to use as possible. The purpose of a DVR is to continually record the
road ahead and to automatically record and save any incidents or accidents you might be involved in. To ensure that
your DX10 does this as efficiently as possible, it will always power up in to video mode and begin recording
automatically so that you never miss a thing. Simply connect your DX10 to a power source that comes on when you
start the engine of your vehicle, and DX10 will start recording automatically without you having to remember to touch
a button.
6.