aguri VISION DX10 User Manual page 13

User tip. If you select 'Off' your DX10 will remain powered on. If you want to use functions such as Motion detection or Anti-
vandal mode, you must leave Auto power off set to 'Off'
Beep sound
DX10 will emit a beep each time you press a button. You can switch this beep on or off depending on your preference.
To make your selection, enter the menu and use the up and down buttons to highlight 'Beep sound'. Select it by
pressing the Video/Playback/OK button and use the up or down button to choose between Off or On. Press the
Video/Playback/OK button to save your selection and return to the menu.
To exit the menu, press the Menu/Return button.
Language
You can change the menu language between English/German/French/Portuguese/Turkish/Czech/Dutch/Spanish.
To make your selection, enter the menu and use the up and down buttons to highlight 'Language'. Select it by pressing
the Video/Playback/OK button and use the up or down button to choose the language you require. Press the
Video/Playback/OK button to save your selection and return to the menu.
To exit the menu, press the Menu/Return button.
TV Mode
It is possible to play any video recorded through TV. If you would like to do this make sure that your DX10 is set to the
appropriate TV format for your region. You can choose between PAL and NTSC.
To make your selection, enter the menu and use the up and down buttons to highlight 'TV Mode'. Select it by pressing
the Video/Playback/OK button and use the up or down button to choose the format you require. Press the
Video/Playback/OK button to save your selection and return to the menu.
To exit the menu, press the Menu/Return button.
13.