Format Sd Card - aguri VISION DX10 User Manual

HZ Frequency
You can switch the HZ Frequency between 50 Hz and 60 Hz.
To make your selection, enter the menu and use the up and down buttons to highlight 'Frequency' Select it by pressing
the Video/Playback/OK button and use the up or down button to choose the frequency you require. Press the
Video/Playback/OK button to save your selection and return to the menu. To exit the menu, press the Menu/Return
button.
LCD Off
You can control whether you would like the LCD to be on or off whilst you are driving. If you switch it on, it will display
what it is recording at all times. If you switch it off, it will display what it is recording for a short period after you first
power on your DX10 but will then switch off automatically.
To make your selection, enter the menu and use the up and down buttons to highlight 'LCD off' Select it by pressing
the Video/Playback/OK button and use the up or down button to choose Off or On. Press the Video/Playback/OK
button to save your selection and return to the menu.
To exit the menu, press the Menu/Return button.
Format (SD card)
If you are adding a new SD card to the device we recommend you format it before use. You can also use this function if
you would like to clear and re-set your existing SD card.
To Format an SD card, enter the menu and use the up and down buttons to highlight 'Format' and select it by pressing
the Video/Playback/OK button. Your DX10 will show only one option 'SD card'. To proceed and Format your SD card
press the Video/Playback/OK button. Your DX10 will display the message 'All data will be deleted' and 'Cancel' or 'OK'.
If you want to proceed, use the up or down buttons to highlight 'OK' or if you do not want to proceed highlight 'Cancel'.
Press the Video/Playback/OK button to make your selection.
To exit the menu, press the Menu/Return button.
User tip. Please remember that if you Format an SD card, any data or video recorded and saved to that card will be
permanently deleted.
14.