Camera Operation; Camera Settings - aguri VISION DX10 User Manual

Default setting
Use this function to return your DX10 to it's original default factory settings.
Enter the menu and use the up and down buttons to highlight 'Default setting' and select it by pressing the
Video/Playback/OK button. Your DX10 will display the message 'Return menu settings to defaults' and 'Cancel' or 'OK.
To proceed and return your DX10 to it's original factory settings, use the up or down buttons to highlight 'OK'. If you do
not want to proceed highlight 'Cancel' instead. Press the Video/Playback/OK button to make your selection.
To exit the menu, press the Menu/Return button.
Version
Use this feature to check the version number of the software currently installed on your DX10.
Enter the menu and use the up or down buttons to highlight 'Version' and select it by pressing the Video/Playback/OK
button. The version number currently installed will be displayed. Press the Video/Playback/OK button to return to the
menu or press the Menu/Return button to exit the menu and return to the DX10 standby screen.

Camera operation

Your Aguri DX10 DVR has been designed primarily to function as a DVR, to record the road ahead and to save any
incidents or accidents you may be involved in. However, in addition to the DVR function, your DX10 can also be used to
take still photographs.
DX10 will always power up in Video mode, so to switch to Camera mode, press the camera mode button. To confirm
you are now in Camera mode, a camera icon will now be displayed in the top left-hand corner of the screen. To take a
picture, simply line up the object you want to capture using the LCD and press the Camera mode button once.

Camera settings

To change the camera settings, switch to camera mode by pressing the Camera mode button and then press the
Menu/Return button to enter the Camera settings menu.
User tip. Once you are in the Camera settings menu, if you press the Menu/Return button again you will enter the System
settings menu (indicated by the 'spanner' icon) This is the same System setting menu you can also access from the Video
settings menu.