NETGEAR FUSE User Manual page 37

Item Description
Set the maximum number of WiFi devices that can connect to each of the WiFi
networks (Main and Guest). The total is limited to the Max WiFi value.
Main WiFi /
Guest WiFi
Click
WiFi number.
WiFi Options
Choose whether to show or hide the WiFi network name and password on the
WiFi Info on hotspot's home screen. (Choose Hide if you want to be sure unwanted users
Home can't look at the home screen and log in.) See
Network Name and Password on LCD Home
Choose whether the WiFi radio turns off or stays on when your device is
USB Tether
tethered to a computer. (See
Connection
This setting determines the type of wireless devices that can connect to your
network.
Recommended options:
●
Mode
●
Note: If you change this value to 802.11 B/G/N and the specified WiFi security
Encryption type is not supported by this value, the security Encryption type may
change to WPA/WPA2 Personal.
This is the active channel of the WiFi access point. If your network is having
performance issues (possibly caused by other WiFi networks in the vicinity
WiFi Channel
using the same channel), try a different WiFi channel. See
Channel.
This setting specifies the smallest packet size, in bytes, for which RTS/CTS
(Request to Send/Clear to Send) handshaking is used. The recommended
RTS Threshold
value is 2347. Change this value only if you're experiencing inconsistent data
flow. Make only minor changes to this value.
Mobile Hotspot Manager (Browser) Interface
to increase the Main WiFi number, or
Turn WiFi On or Off When
802.11 G – Choose only if you're certain that all of the WiFi devices
used with your hotspot support 802.11 G. This option ensures faster
WiFi speeds.
802.11 B/G/N or 802.11 B/G – Choose if you're not sure which modes
the WiFi devices used with your hotspot support.
DRAFT
to increase the Guest
Show or Hide the Main WiFi
Screen.
Tethered.)
Change the WiFi
32