NETGEAR FUSE User Manual page 15

The faster method is to connect your device to the AC charger. Alternatively, you can connect your device
to your computer, although this charges more slowly.
Charge Using the AC Adapter
1. Insert the larger (Type A) end of the micro-USB cable into the AC charger.
2. Insert the other end of the cable into the micro-USB port on the side of your device.
3. Insert the AC charger into an electrical outlet. (If the battery is already partially charged when the
charger is plugged into the outlet, your device will power on automatically.)
While your device is charging, the percentage charge that the battery has displays on the LCD (and the
Mobile Hotspot Manager home page, if your device is on).
When your device is fully charged, the full battery icon and message display on the LCD (and the Mobile
Hotspot Manager home page, if your device is on).
Charge Using a USB to Computer Connection
Note: If you will be using the USB connection to connect to the Internet (and not just for charging your
device), you must install the device driver. (See TRU-Install.)
Note: If you are using Mac OS X 10.4.x, after you connect your device, you may see a warning message
that your computer is running on the UPS backup battery and that you should prevent a computer
shutdown. You can continue with your work. To prevent this message from being displayed, install the
device driver.
1. Make sure that your computer is turned on.
Getting Started
DRAFT
10