Denon AVR-X4100W Service Manual page 87

Error
USB Update Error Display
Code
S u b
5B
U p d a t i n g
S u b
5C
U p d a t i n g
S u b
5D
U p d a t i n g
S u b
5E
U p d a t i n g
S u b
5F
U p d a t i n g
S u b
60
U p d a t i n g
S u b
61
U p d a t e C h e c k N G
S u b
62
U p d a t i n g
S u b
63
U p d a t i n g
S u b
64
U p d a t i n g
G U I
80
U p d a t i n g
G U I
81
U p d a t i n g
G U I
82
U p d a t i n g
G U I
83
U p d a t i n g
NACK received in response or no
* * * m i n
response from Sub for L com-
f a i l 5 B
mand.
* * * m i n
No Update Packet received from
CX870 / CY920 (Time Out).
f a i l 5 C
Abnormal data in Update Packet
* * * m i n
received from CX870 / CY920
f a i l 5 D
(CRCError).
Abnormal data in Update Packet
* * * m i n
received from CX870 / CY920
f a i l 5 E
(PacketNoError).
* * * m i n
Setup failure of the transfer meth-
od of XModem.
f a i l 5 F
NACK received in response or no
* * * m i n
response from Sub for P com-
f a i l 6 0
mand.
Mismatched Check Sum in re-
* * * m i n
sponse or no response from Sub
6 1
for I command.
* * * m i n
Failed to start up Sub in Power On
sequence during Update.
f a i l 6 2
* * * m i n
Failed to transit to Application
Mode.
f a i l 6 3
* * * m i n
Failed to transit to Application
Mode.
f a i l 6 4
Write Enable Latch Bit not set in
* * * m i n
Read after issuing WREN com-
f a i l 8 0
mand.
* * * m i n
Block Erase failed in Read after
issuing BE command.
f a i l 8 1
* * * m i n
No Update Packet received from
CX870 / CY920 (Time Out).
f a i l 8 2
Abnormal data in Update Packet
* * * m i n
received from CX870 / CY920
f a i l 8 3
(CRCError).
87
Details of Error code Coping strategies
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for five seconds.