Denon AVR-X4100W Service Manual page 74

3.7. TUNER STEP mode (E2/E3 only)
3.9.1. Actions
This is a special mode for enabling reception STEP of the ANALOG TUNER to be changed.
3.9.2. Starting up
Hold down buttons "STATUS" and "ZONE3 SOURCE" at the same time and press the power button to turn on the pow-
er.
Select the "5. TUNER FRQ SET" using the button "CURSOR f / d ", and press the button "ENTER" to commit the selection.
3.9.3. Displays
Start this unit in TUNER STEP mode, select using button "CURSOR 0 / 1 " and enter using button "ENTER".
The following information is displayed in the following order.
(1) AM9kHz/FM50kHz selected
L1
* T U N E R
FLD
L2
<
"CURSOR 0 "
(2) AM10kHz/FM200kHz selected
FLD L2
<
(3) Press the power button to turn off the power.
(4) Press the power button to turn on the power.
F R Q
A M 9 / F M 5 0
"CURSOR 1 "
A M 1 0 / F M 2 0 0
"ENTER"
S e t
>
>
74