Technical Specifications; Dimension - Denon AVR-X4100W Service Manual

TECHNICAL SPECIFICATIONS

n n Audionsection
•n Powernamplifier
Ratednoutputn:
Frontn:n
125W+125W ( 8Ω, 20Hz - 20kHz with 0.05% T.H.D.)
165W+165W ( 6Ω, 1kHz with 0.7% T.H.D)
Centern:
125W ( 8Ω, 20Hz - 20kHz with 0.05% T.H.D.)
165W ( 6Ω, 1 kHz with 0.7 % T.H.D.)
Surroundn:
125W+125W ( 8Ω, 20 Hz - 20 kHz with 0.05% T.H.D.)
165W+165W ( 6Ω, 1 kHz with 0.7 % T.H.D.)
Surroundnbackn/nHeight1n/nFrontnwide/Height2n:
125W+125W ( 8Ω, 20 Hz - 20 kHz with 0.05% T.H.D.)
165W+165W ( 6Ω, 1 kHz with 0.7 % T.H.D.)
Dynamicnpowern:
130 W x 2-channel (8 Ω)
190 W x 2-channel (4 Ω)
Outputnconnectors ： 4 - 16Ω
n n Analognsection
Inputnsensitivity/Inputnimpedancen: 200 mV/47 kΩ
Frequencynresponsen:nn 10 Hz - 100 kHz — +1, -3 dB(Direct mode)
S/Nn: 102 dB(IHF-A, weighted, Direct mode)
Distortionn:
Ratednoutputn:
n n Digitalnsection
D/Anoutputn: Rated output — 2V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1kHz, 0dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digitalninputn: Format — Digital audio interface
n n Phononequalizernsection
Inputnsensitivityn:nn n
RIAAndeviationn: ±1 dB (20 Hz to 20 kHz)
S/Nn:
74 dB (IHF-A)
Distortionnfactorn:nn
n n Videonsection
•n Standardnvideonconnectors
Input/outputnlevelnandnimpedancen: 1 Vp-p, 75 Ω
Frequencynresponsen: 5 Hz – 10 MHz — 0, –3 dB
•n Colorncomponentnvideonconnector
Inputnsensitivity/Inputnimpedancen: Y signal — 1 Vp-p, 75 Ω
Frequencynresponsen: 5 Hz – 60 MHz — 0, –3 dB

DIMENSION

Unit： in. (mm) Weight： 27 lb 12 oz (12.6 kg)
1 27/32 (47)
0.005 % (20 Hz – 20 kHz) (Direct mode)
1.2 V
2.5 mV
0.03 % (1 kHz, 3 V)
PB / CB signal — 0.7 Vp-p, 75 Ω
PR / CR signal — 0.7 Vp-p, 75 Ω
17 3/32 (434)
13 25/64 (340)
n n Tunernsection
FM
Receptionnfrequencynrangen: FM 87.5 MHz - 107.9 MHz(for E3)
Effectivensensitivityn: FM 1.2μV （12.8dBf）
AM 18 μV
50ndBnsensitivityn: MONO ― 2.8 μV (20.2 dBf)
S/Nnration: MONO ― 70 dB (IHF-A weighted, Direct mode)n
STEREO ― 67 dB (IHF-A weighted, Direct mode)
Distortionn: MONO ― 0.7 % (1 kHz)n
SRETEO ― 1.0 % (1 kHz)
n n WirelessnLANnsection
Networkntypenn
(wirelessnLANnstandard):nConforming to Wi-Fi®z1
Securityn:n WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radionfrequencyn: 2.4 GHz
No.nofnchannelsn: 1 – 11 ch (for E3)
1 – 13 ch (for E2, E1, E1C, JP)
z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product
Logo are registered trademarks of the Wi-Fi Alliance.
n n Bluetoothnsection
Communicationsnsystemn:nn B luetooth Version 2.1 + EDR
(Enhanced Data Rate)
Transmissionnpowern: Maximum 2.5 mW (Class 2)
Maximumncommunicationnrangen: Approx. 32.8 ft/10 m in line of sight
Frequencynbandn: 2.4 GHz band
Modulationnschemen: FHSS (Frequency-Hopping Spread Spectrum)
Supportednprofilesn: A2DP 1.2 (Advanced Audio Distribution Profile)
AVRCP 1.4 (Audio Video Remote Control Profile)
Correspondingncodecn: SBC, AAC
Transmissionnrangen(A2DP)n:n20 Hz - 20,000 Hz
n n General
Powernsupplyn: (for E3) :
(for E2/E1) :
(for E1C) :
(for JP) :
Powernconsumptionn: 670W
Powernconsumptionninnstandbynmoden: 0.1W
PowernconsumptionninnCECnstandbynmoden: 0.5W
Powernconsumptionninnnetworknstandbynmoden: 2.7W
For purposes of improvement, specifications and design are subject to
change without notice.
2 23/64
(60)
1 27/32 (47)
9
FM 87.5 MHz - 108.0 MHz(for E2,E1. E1C)
FM 76.0 MHz - 90.0 MHz(for JP)
AM 520 kHz - 1710 kHz(for E3)
AM 522 kHz - 1611 kHz(for E2,E1. E1C)
AM 522 kHz - 1629 kHz(for JP)
AC 120 V, 60 Hz
AC 230 V, 50 Hz / 60Hz
AC 220 V, 50 Hz
AC 100V、 50/60Hz