HP 39gII User Manual page 305

AngleA
AngleB
AngleC
RECT
Modes variables
Programming
The measure of angle A. Sets the measure of angle A.
The value of this variable will be interpreted according to
the angle mode setting (Degrees or Radians). From
the Triangle Solver Numeric view, enter a positive value
for A.
Or, in a program, type:
n
AngleA
where
>
n 0
The measure of angle B. Sets the measure of angle B.
The value of this variable will be interpreted according to
the angle mode setting (Degrees or Radians). From
the Triangle Solver Numeric view, enter a positive value
for B.
Or, in a program, type:
n
AngleB
where
>
n 0
The measure of angle C. Sets the measure of angle C.
The value of this variable will be interpreted according to
the angle mode setting (Degrees or Radians). From
the Triangle Solver Numeric view, enter a positive value
for C.
Or, in a program, type:
n
AngleC
where
>
n 0
Corresponds to the status of
the Triangle Solver app. Determines whether a general
triangle solver or a right triangle solver is used. From the
Triangle Solver view, press
Or, in a program, type:
0 RECT—for the general Triangle Solver
1 RECT—for the right Triangle Solver
These variables are found in the Symbolic setup of an
app. They can be used to overwrite the value of the
corresponding variable in Home Modes.
in the Numeric view of
.
295