Capturing Still Images During Video Recording - JVC GZ-RX515 Detailed User Manual

Memo :
Check the remaining recording time in the media before you start shooting.
0
If there is not enough space, move (copy) the data to a computer or disc.
When there are many files in the media, it may take time for them to be
0
displayed on the playback screen. Wait for a while as the POWER/
ACCESS lamp blinks, indicating normal operation.
Do not forget to make copies after recording!
0
Recording stops automatically as it cannot be performed for 12 or more
0
consecutive hours according to specifications.
(It may take some time to resume recording.)
Up to 4GB per video file can be recorded. File recorded using long
0
recordings that exceeds 4GB is split and recorded into several video files.
You can record or play back videos while the AC adapter is connected for
0
charging. (However, the charging time will be longer than usual. In
addition, the remaining battery power may decrease according to
conditions.)
If the internal temperature rises when using the unit, stop the charging
temporarily. (The CHARGE lamp goes off.)
Depending on the subject and shooting conditions, recording may not be
0
performed properly even in the Intelligent Auto mode.
Depending on the shooting conditions, the four corners of the screen may
0
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.

Capturing Still Images During Video Recording

Still images can be captured by tapping the A button while in the video mode
(standby or recording).
.
"PHOTO" lights up on the screen when a still image is being captured.
0
.
The still images captured during video recording are saved to the
0
destination set in "REC MEDIA FOR IMAGE".
Memo :
The size of the still image that is captured in the video mode is 1,920 x
0
1,080.
Operation is invalid under the following conditions:
0
- when menu is being displayed
- when remaining recording time or battery power is being displayed
- when any functions in "TIME-LAPSE RECORDING", "ANIMATION
EFFECT", "RECORDING EFFECT", "CLOSE-UP SUB-WINDOW" or
"DATE/TIME RECORDING" is set
- when the AV cable is connected to the AV connector
- when the HDMI cable is connected and a resolution other than 1080i is
output
Recording
25