Using Wi-Fi By Creating A Qr Code; Direct Monitoring - JVC GZ-RX515 Detailed User Manual

DIRECT MONITORING

Setting (Once setting is done, start from the "Regular
o
Operation" below)
Creating a QR Code
Enter values in the required items for direct monitoring.
o
Password: set a password to connect this camera to the device by direct
0
monitoring. (8 to 63 characters (64 characters in case of hexadecimal))
Enforced Group Owner: setting used to enable a connection with a device
0
that does not support Wi-Fi Direct. Normally set to "ON".
HTTP Port: Normally set to "80".
0
Display the screen for reading the QR code.
1
Tap "MENU".
(Operation on this camera)
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.
3
Tap "Wi-Fi SETTING".
(Operation on this camera)
.
4
Tap "SET FROM QR CODE".
.

Using Wi-Fi by Creating a QR Code

5
Tap "EXECUTE".
.
Read a QR code.
1
Read a QR code.
(Operation on this camera)
.
2
Tap "YES".
.
3
Tap "OK".
.
Tap "NEXT" to return to the screen to read the QR code.
0
Set contents are saved.
0
119