Operating Procedure - JVC GZ-RX515 Detailed User Manual

Recording
Using the Silent Mode
When the Silent mode is used, the LCD monitor darkens and operation
sounds will not be output. Use this mode to record quietly in dark places such
as during a performance.
T appears when "SILENT MODE" is set to "ON".
0
To mute only the operating sound, set "OPERATION SOUND" in the menu
0
to "OFF" instead of using the silent mode.
" OPERATION SOUND " (A p. 143)

Operating procedure

o
A Tap "MENU".
The top menu appears.
0
B Tap T.
.
C Tap "ON".
.
24
Useful Settings for Recording
When "AUTO POWER OFF" is set to "ON", this unit turns itself off
0
automatically to conserve power when it is not operated for 5 minutes.
(When using the AC adapter, this unit goes into standby mode.)
" AUTO POWER OFF " (A p. 143)
When "TOUCH PRIORITY AE/AF" is set to "FACE TRACKING", this unit
0
detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.
"Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)" (A p. 42)
If the remaining space on the built-in memory runs out while "SEAMLESS
0
RECORDING" is set to "ON", recording continues after switching to the
SD card.
When "DATE/TIME RECORDING" is used, the date and time can be
0
recorded together with the video.
"Recording Videos with Date and Time" (A p. 48)
Caution :
Do not expose the lens to direct sunlight.
0
While this unit may be used with the LCD monitor reversed and closed,
0
the temperature rises more easily. Leave the LCD monitor open when
using this unit for long periods of time, or in places exposed to direct
sunlight or high temperatures.
The power may turn off to protect the circuit if the temperature of this unit
0
rises too much.
If the temperature of this unit rises during recording, 7 changes color
0
to yellow as a notification.
Do not remove the SD card while the POWER/ACCESS lamp is lighted.
0
The recorded data may become unreadable. Before inserting or removing
the SD card, close the LCD monitor and ensure that the POWER/ACCESS
lamp goes off.
"Inserting an SD Card" (A p. 10)
This unit is a microcomputer-controlled device. Electrostatic discharge,
0
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, close the monitor screen to turn
off the power and remove the AC adapter, then press the Reset button to
reset this unit.
"Resetting this Unit" (A p. 6)
Disclaimer
0
- We shall not be held responsible for loss of recorded contents when
recording videos/audio or playback cannot be operated due to
malfunctions in this unit, provided parts, or SD card.
- Once deleted, recorded contents (data), including data loss due to
malfunctions in this unit, cannot be restored. Please be forewarned.
- JVC will not be responsible for any lost data.
- In order for quality improvement, defective recording medium is subject
to be analyzed. Therefore, it may not be returned.