Operating Procedure - JVC GZ-R315 Detailed User Manual

Using the Silent Mode
When the Silent mode is used, the LCD monitor darkens and operation
sounds will not be output. Use this mode to record quietly in dark places such
as during a performance.
T appears when "SILENT MODE" is set to "ON".
0
To mute only the operating sound, set "OPERATION SOUND" in the menu
0
to "OFF" instead of using the silent mode.
" OPERATION SOUND " (A p. 88)

Operating procedure

o
A Tap "MENU".
The top menu appears.
0
B Tap T.
.
C Tap "ON".
.
Useful Settings for Recording
When "AUTO POWER OFF" is set to "ON", this unit turns itself off
0
automatically to conserve power when it is not operated for 5 minutes.
(When using the AC adapter, this unit goes into standby mode.)
" AUTO POWER OFF " (A p. 88)
When "TOUCH PRIORITY AE/AF" is set to "FACE TRACKING", this unit
0
detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.
"Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)" (A p. 39)
When "DATE/TIME RECORDING" is used, the date and time can be
0
recorded together with the video.
"Recording Videos with Date and Time" (A p. 44)
Caution :
Do not expose the lens to direct sunlight.
0
While this unit may be used with the LCD monitor reversed and closed,
0
the temperature rises more easily. Leave the LCD monitor open when
using this unit for long periods of time, or in places exposed to direct
sunlight or high temperatures.
The power may turn off to protect the circuit if the temperature of this unit
0
rises too much.
If the temperature of this unit rises during recording, 7 changes color
0
to yellow as a notification.
Do not remove the SD card while the POWER/ACCESS lamp is lighted.
0
The recorded data may become unreadable. Before inserting or removing
the SD card, close the LCD monitor and ensure that the POWER/ACCESS
lamp goes off.
"Inserting an SD Card" (A p. 9)
This unit is a microcomputer-controlled device. Electrostatic discharge,
0
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, close the monitor screen to turn
off the power and remove the AC adapter, then press the Reset button to
reset this unit.
"Resetting this Unit" (A p. 5)
Disclaimer
0
- We shall not be held responsible for loss of recorded contents when
recording videos/audio or playback cannot be operated due to
malfunctions in this unit, provided parts, or SD card.
- Once deleted, recorded contents (data), including data loss due to
malfunctions in this unit, cannot be restored. Please be forewarned.
- JVC will not be responsible for any lost data.
- In order for quality improvement, defective recording medium is subject
to be analyzed. Therefore, it may not be returned.
Memo :
Check the remaining recording time in the media before you start shooting.
0
If there is not enough space, move (copy) the data to a computer or disc.
When there are many files in the media, it may take time for them to be
0
displayed on the playback screen. Wait for a while as the POWER/
ACCESS lamp blinks, indicating normal operation.
Do not forget to make copies after recording!
0
Recording stops automatically as it cannot be performed for 12 or more
0
consecutive hours according to specifications.
(It may take some time to resume recording.)
Up to 4GB per video file can be recorded. File recorded using long
0
recordings that exceeds 4GB is split and recorded into several video files.
You can record or play back videos while the AC adapter is connected for
0
charging. (However, the charging time will be longer than usual. In
addition, the remaining battery power may decrease according to
conditions.)
If the internal temperature rises when using the unit, stop the charging
temporarily. (The CHARGE lamp goes off.)
Depending on the subject and shooting conditions, recording may not be
0
performed properly even in the Intelligent Auto mode.
Depending on the shooting conditions, the four corners of the screen may
0
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.
Recording
23