Table of Contents
Advertisement
4
Plug the other end of the Ethernet cable
into the hub.
5
Hold down the power switch for
approximately one second to turn on the
power.
6
Press the <SETTING> key on the
operator panel.
7
Press the
to select [Easy Setup], and
press
.
OK
8
Enter the administrator password.
The factory default password is "aaaaaa".
a
Press , ,
character you want, and then
press
OK
- The selected character is entered as "*" in
the text field.
- If you have entered an incorrect value,
press the <CLEAR> key and then enter
the correct value.
b
Repeat step
required are entered.
c
Press the
and press
9
Press the
Setting], and then press the .
10
If setting the IP address manually, check
that [Manual] is selected, and press
If obtaining the IP address automatically, press
the
to select [Auto], and press
the step 15.
- 97 -
Printing from a Computer
,
to select the
.
a
until all characters
and
to select [Enter]
.
OK
to select [Network
. Proceed to
OK
5
.
OK
Advertisement
Table of Contents
