Table of Contents
Advertisement
3
Press the
to select [Local PC] and
then press
.
OK
4
Check that [Select A Connecting PC]
is selected and then press
5
Check that [From Network] is selected
and then press
OK
6
Press the
to select the computer you
want and then press
7
to select [Select An
Press the
Application] and then press
8
Press the
to select where to send the
scanned document and then press
Selectable location Values to send:
Application
Folder
Note
● For Mac OS X, you can select [Folder] only.
9
Press
or
M
ONO
ActKey (for Windows) or Image Capture (for
Mac OS X) starts, and the scan job starts
automatically on the computer. When scanning is
done, the scanned image is processed as below:
- If you select [Application], the specified
application starts and the scanned image
is displayed on the application.
- If you select [Folder], the scanned image
is saved in the specified folder.
- If you select [PC-FAX], the application for
fax transmission starts. After sending the
scanned image, send a fax with the fax
transmission software on your computer.
Reference
● To load a landscape document, refer to the User's Manual
(Basic) > "1. Setup" > "Loading Paper and Documents" >
"Documents" > "Loading Documents".
● You can customize the scan button settings of ActKey.
For details, refer to the User's Manual (Advanced) >
"3. Scanning" > "Using Drivers and Software" > "Using
ActKey Software" > "Setting the Scan Button".
.
OK
.
.
OK
.
OK
.
OK
PC-FAX
.
C
OLOR
„ For USB Connection
1
Press the <SCAN> key on the operator
panel.
- 91 -
Scanning to Local PC
4
Advertisement
Table of Contents
