Muratec MFX-3091 Quick Start Manual page 104

Hide thumbs Also See for MFX-3091:
Table of Contents

Advertisement

Printing from a Computer
2
Hold down the power switch for
approximately one second to turn off the
power. And turn off a computer.
3
Plug one end of the Ethernet cable into
the network interface connection on the
back of the machine.
5
4
Plug the other end of the Ethernet cable
into the hub.
5
Hold down the power switch for
approximately one second to turn on the
power.
6
Press the <SETTING> key on the
operator panel.
7
Press the
press
.
OK
8
Enter the administrator password.
The factory default password is "aaaaaa".
- 104 -
to select [Easy Setup], and

Advertisement

Table of Contents
loading

Table of Contents