Coaxial (Good) - Insignia NS-40D510MX15 User Manual

NS-40D510MX15_14-0757_MAN_V1_ENG.book Page 17 Friday, August 8, 2014 10:31 AM

Coaxial (good)

Cable or
satellite box
On your TV
Coaxial cable
connector
ANT/CABLE
jack
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE jack on the back of your TV and to the coaxial out jack
on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight TV, then press ENTER.
7 If you cannot tune to channels you know exist, scan for channels. See "Automatically scanning for channels" on
page 51.
Notes
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
Coaxial cable
Back of TV
www.insigniaproducts.com
NS-40D510MX15 Insignia 40" LED TV
17