NS-40D510MX15_14-0757_MAN_V1_ENG.book Page 19 Friday, August 8, 2014 10:31 AM
Connecting a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see "What connection should I use?" on page 12.
HDMI (best)
On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT
jack on the DVD or Blu-ray player.
3 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
or
to highlight HDMI 1 or HDMI 2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
Side of TV
www.insigniaproducts.com
NS-40D510MX15 Insignia 40" LED TV
DVD or Blu-ray player
HDMI cable
19