NordicTrack C 990 User Manual page 29

Hide thumbs Also See for C 990:
Table of Contents

Advertisement

Units—The selected unit of measurement will
appear in the matrix. To change the unit of mea-
surement, press the Enter button. To view distance
in miles, select ENGLISH. To view distance in
kilometers, select METRIC.
Default Menu—The default menu will appear when
you insert the key into the console or when you
press the Home button. Press the Enter button
repeatedly to select the manual main screen or the
iFit screen as the default menu.
Firmware Update—For the best results,
regularly check for firmware updates.
Note: The matrix will display NOT CONNECTED if
the console is not connected to a wireless network.
Press the Enter button to check for firmware
updates using your wireless network. If an update
is available, the update will begin automatically.
IMPORTANT: To avoid damaging the treadmill,
do not turn off the power while the firmware is
being updated. The update may take several
minutes.
Note: Occasionally, a firmware update may cause
your console to function slightly differently. These
updates are always designed to improve your exer-
cise experience.
Default Settings—To restore the console to its
factory default settings, press the Enter button.
Note: The console will erase any information that
you have saved in its memory.
IP Address—Displays the console's IP Address.
The WiFi–Normal option will allow you to set up
a wireless network connection using the console.
See step 4 on page 29 for instructions.
The WiFi–Advanced option will allow you to set up
a wireless network connection using your com-
puter, smart phone, tablet, or other Wi-Fi device.
See step 6 on page 30 for instructions.
Connect to iFit Account—To set up a different iFit
account, but maintain the existing wireless connec-
tion, follow the instructions in the matrix.
Note: This option will rarely be used.
Clear WiFi Setting—To erase the console's
wireless network settings and have it forget the
currently selected wireless network, follow the
instructions in the matrix.
Contrast—To adjust the contrast level of the
display, press the Incline increase and decrease
buttons.
4. Use WiFi–Normal to set up a wireless
connection.
This option will allow you to set up a wireless net-
work connection using the console.
Note: You will need to know your network name
(SSID). If your network has a password, you will
also need to know the password.
To set up a wireless network connection using the
console, first press the Enter button.
Next, set the
included WiFi
setup card on
the console.
The buttons
on the WiFi
setup card are
referenced in
the following
instructions.
29
Card

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ntl19814.0

Table of Contents