Light Kit - Hunter M0050-01 User Manual

Light Kit

Connect the plugs from the upper and
lower switch housings. Make sure to line up
the colored markings on the connectors.
Want to install your fan without a light kit?
Go to www.HunterFan.com/FAQs and click
"How do I install my fan without the light kit?"
Screw
Holes
Lift the lower switch housing up until its
screw holes are aligned with the screw holes
in the upper switch housing.
14
M0050-01 • 08/24/15 • © 2012–2015 Hunter Fan Company
www.HunterFan.com
Install the three switch housing screws
found in the hardware bag.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.
1.888.830.1326