Antenna Basic Connection - Magnavox 27MT3305/17 User Manual

B
1
ASIC
Y our home's signal input might come from
a single (75 ohm) round cable, a
Converter Box, or from an antenna. In either
case the connection to the TV is very easy.
1 If your Cable TV signal or
Antenna signal is a round cable
(75 ohm) then you're ready to con-
nect to the TV.
If your antenna has flat twin-
lead wire (300 ohm), you first need
to attach the antenna wires to the
screws on a 300 to 75 ohm adapter.
If you have a Cable Converter
Box: Connect the Cable TV signal
to the Cable Signal IN(put) plug on
the Converter.
2 Connect the Cable TV cable or
Antenna cable (or 300 to 75 ohm
adapter) to the 75Ω plug on the TV.
If you have a Cable Converter
Box: Connect the OUT(put) plug
from the Converter to the 75Ω plug
on the TV.
H
ELPFUL
After using the AutoProgram Control,
press the CH + and – buttons to
scroll through all the channels stored
in the television's memory.
A
NTENNA AND
coming from
Cable Company
H
INT
C
ABLE
Antenna Connection
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
Twin Lead
Wire
Round Cable
75Ω
Direct Cable Connection
Cable signal
75Ω Round
Coaxial Cable
C
ONNECTIONS
300 to 75Ω
Adapter
Back of TV
Jack Panel Back of TV
Back of TV