Installing A Modular Bay Device; Optical Drive; Handling Optical Disks - Fujitsu LIFEBOOK T725 Operating Manual

Working with the notebook

Installing a modular bay device

► Place the modular bay device into the modular bay so that the contacts enter first.
► Push the modular bay device into the modular bay until you feel it lock into place.

Optical drive

Opticaldrive
This product contains a light-emitting diode, classified in accordance with IEC
608251:2007: LASER CLASS 1, and therefore must not be opened.

Handling optical disks

Opticaldisks
Observe the following guidelines when handling optical disks:
• Avoid touching the surface of an optical disk. Only hold the optical disk at the edge.
• Always store the optical disk in its case. This will prevent the optical disk from
becoming dusty, scratched or damaged in any other way.
• Protect your optical disk against dust, mechanical vibrations and direct sunlight.
• Do not store an optical disk in areas subject to high temperatures or humidity.
You may use 8 cm / 3.15 inch or 12 cm / 4.7 inch diameter optical disks in the drive.
When using a poor quality optical disk, vibrations and read errors may occur.
56 Fujitsu