Connecting an external monitor
An analog monitor is connected to the analog external monitor port (VGA), a digital
monitor to the Display Port or to the DVI-D monitor port on the optional port replicator.
The display output is limited to a maximum of two monitors at any one time (see
combinations", Page
Monitorport
Monitorport
VGAsocket
Monitor
Digital Display Port (on notebook or on optional
port replicator)
Digital DVI-D monitor port (on optional port
replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch back and forth between the external monitor and the LCD
screen of the notebook, see chapter
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
Fujitsu
47, section "Toggle display output").
Connecting external devices
Analog external monitor port (VGA) (on
notebook or on optional port replicator)
"Key combinations", Page
"Key
47.
79