Inserting And Connecting Your Device; Properly Insert The Device In Your Computer - Verizon u620l User Manual

Inserting and Connecting Your Device

Properly Insert the Device in Your Computer

Open the USB connector
➊
Use your thumb to gently flip open the USB connector on your USB modem. Be sure to
avoid over-extending the USB connector past its resistance point. Avoid opening the USB
connector with metal objects as this might damage the pins.
To properly insert the device
➋
Hold the device along the side edges and gently insert it into your computer's USB port. On
most computers, insert the MiFi U620L with the label facing up. It should fit easily into the
port. Some computers might orient the USB port so the device label faces down or sideways.
Do not force the device into the port as this might damage both the device and the port.
➌
Position the modem as indicated in the following illustrations to maintain SAR compliance
and to ensure proper performance. This modem has been designed and tested to meet
SAR compliance as outlined by the FCC. If the modem is connected to USB ports other than
those shown, ensure that the device maintains a separation distance of at least 5 mm.
IMPORTANT The device must be positioned at 120° for optimal functionality. Failure to
maintain a position between the normal operating range of 110° - 130° will cause the device to
stop functioning.
NOTE
If you are having difficulty inserting the device into your computer's USB port, verify that you are
inserting the device in the correct orientation and that you are using a Type A USB port. While
starting up, the Status LED will illuminate solid amber, then flash amber and green.
8