INSTALLATION
GLASS DOOR INSTALLATION
1. Lift glass door and slot keyhole in glass door over screw installed in unit
body.
7
Log 7 in position
8. Log 8 will cover pilot assembly, resting on pilot assembly bracket and trim
of the burner tray as shown below.
8
Log 8 covers Pilot Assembly
. Rest Log 9 upright against Log 2 as shown below
2. Once in position, slide glass door down and secure with 2 screws at the
bottom of the door as shown below, and tighten the top 2 (two) screws.
3. To remove- reverse steps.
9
2
Log 9 rests on Log 2
Final Install
20
Regency GFI300L Gas Fireplace Inbuilt