Magnadyne M1-LCD Operation And Installation Manual page 14

Radio Operation
(Continued)
Programming Radio Stations:
1. Press the BAND button to select from the
AM1, AM2, FM1, FM2 or FM3 radio band.
2. Tune in the desired radio station.
3. To program the station, press and hold one of
the six Radio Station Recall buttons until you
hear a beep. The Radio Station Recall button
will now contain the programmed radio sta-
tion frequency.
4. The Programmed Radio Station Recall
Indicator will appear in the display.
Recalling Programmed Radio Stations:
1. Press the BAND button to select from the
AM1, AM2, FM1, FM2 or FM3 radio band.
2. Press and release one of the six Radio Station
Recall buttons to select the programmed
radio station.
Automatically Store Radio Stations:
1. Press the BAND button to select from the
AM1, AM2, FM1, FM2 or FM3 radio band.
2. Press and hold the AMS button until "SEARCH"
appears in the display. The tuner will search for
the strongest stations and store them into mem-
ory. The new stations will replace stations that
were previously stored in the current band.
Note: After the new stations are stored into
memory, the tuner will start scanning the
newly programmed stations.
3. When a desired station is reached, press the
ASM button to stop the scanning.
Scanning Stored Radio Stations:
1. Press the TUNE knob to select from the AM1,
AM2, F1, F2 or F3 radio band.
2. Press the ASM button and the tuner will scan
for preset stations stored in the current band
and pause for 5 seconds at each station.
When a desired station is reached, press the
ASM button again to stop scanning.
14
Memorized Radio Station Indicator
Hold
Hold