Temperature Option (Setting The Range); Switching The Vibration Alarm On/Off - Amplicomms Watch & Care V130 User Manual

Use these buttons to set temperature measurement to °C or °F.

Temperature option (setting the range)

You can adjust the upper and lower limit for the temperature monitor. An
alert will occur if the temperature becomes outside the preset temperature
range.
Press the button three times (lower limit) or four times (upper limit).
Lo / Hi
This icon appears with the current setting in the display (Lo = lower
limit / Hi = upper limit).
Use these buttons to adjust the limits (lower limit Off, 12, 15, 18 /
upper limit: 20, 23, 26, Off). When set to "Off" the temperature moni-
toring is deactivated.
Switching the night light on/off
Press the button five times.
This icon appears in the display.
Use these buttons to switch the night light on the transmitter on or
off.

Switching the vibration alarm on/off

Press the button six times.
This icon appears in the display.
Use these buttons to switch the vibration alarm on or off.
When the vibration alarm is activated, the receiver vibrates when
Helpline UK 0844 800 6503
(See page 44 for costs and hours of operation)
O
PERATING THE
R
ECEIVER
35