Troubleshooting guide - Problems and solutions
Equipment does not function
•
Transmitter and/or receiver are not switched on.
•
The batteries are empty or defective.
•
The power adapter plugs are not connected.
No reception
•
Transmitter and receiver are not registered.
•
Transmitter is too far from object being monitored, e.g. baby.
Observe the minimum distance of one meter.
•
The receiver and transmitter are too far apart.
•
The VOX sensitivity is set too low.
Reception interference
•
The receiver and transmitter are too far apart.
•
The battery power is too low.
•
Other electronic devices are causing interference in the field of trans-
mission.
Howling or squealing noise (acoustic feedback)
•
Increase the distance between receiver and transmitter.
•
Reduce the volume on the receiver.
Noise
•
The battery power is too low.
Picture but no sound transmission
•
Volume setting is too low.
Picture is in black and white
•
The night vision function is active.
Helpline UK 0844 800 6503
(See page 44 for costs and hours of operation)
A
PPENDIX
45