Table of Contents
Advertisement
5.7.4 AP Background Discovery
Configure AP Background Discovery, go to: AP Management >> Discovery.
Background AP Discovery: Click Configure to enter Background AP Discovery interface and go
on related configuration.
The configuration is the same as AP Discovery. When Background AP Discovery function is
enabled, the system will scan once every 10 minutes or according to the time set by the
administrator. If any AP is discovered and Auto-Add AP is enabled, it will be assigned an available
IP from the starting IP address and apply the selected template. You can also set the channel of the
AP would use.
AMG-2001
Access and AP Management Gateway
84
User's Manual
Advertisement
Table of Contents
