Hardware Installation - LevelOne AMG-2001 User Manual

2.5 Hardware Installation

Please follow the steps below to install the hardware of AMG-2001:
1) Connect the 12V power adapter to the power socket on the rear panel. The Power LED should be on
to indicate a proper connection.
2) Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the
Ethernet cable to an xDSL/cable modem, or a switch/hub on the LAN of a company/organization.
The LED of this port should be on to indicate a proper connection.
3) Connect an Ethernet cable to one of the LAN1~LAN8 Ports on the front panel. Per your needs,
connect the other end of the Ethernet cable to an administrator PC for configuring the AMG-2001
system, an AP for extending wireless coverage, a switch for connecting more wired clients, or a
client PC. The LED of the connected port should be on to indicate a proper connection.
Caution:
AMG-2001 supports Auto Sensing MDI/MDIX. You may use either a straight-through or a
cross-over Ethernet
AMG-2001 Access and AP Management Gateway
11
User's Manual