Threading The Machine Head - JUKI MF-7500 series Instruction Manual

$. tHrEaDING tHE MacHINE HEaD

WarNING :
to protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest. If threading is wrong,
stitch skipping, thread breakage, needle breakage or irregular stitches will be caused. So, be careful.
Thread the machine head according to the following threading illustrations.
* For the adjustment procedure other than the above, refer to the Instruction Manual for MF-7500.
When the thread tension located in the face plate section is used for the machine with automatic
thread trimmer, the length of needle thread remaining on the needle is shortened and slip-off of the
thread at the start of sewing may occur.
1
1
2
– 7 –
2