Tv Operation; Specifications - Movie Vision MV-DVD-PL5 Owner's Manual

LANGUAGE SETUP
To access the TV Mode press the MODE
button on the remote. The DVD functions
are locked during TV Mode.
Searching Channels
Press MENU (TV SEARCH) button on the
DVD player front panel or MENU on
remote to enter into search mode. On the
remote press
and store TV channels. Press
to stop the search.
Selecting Channels
1. Press
Button to select a channel up or down.
2. The numeric buttons (0-9) allow you to
select the corresponding channel.
3. Press the digital select button 3D(-/--)
and a numeric button to select desired
channel.
Supply Voltage . . . . . . . . 12V DC, Negative Ground
Current Consumption . . Less than 2A
Signal System . . . . . . . . Composite Video 1.0Vp-p 75Ω
Compatible Discs . . . . . . (1) DVD-VIDEO Disc, 5" (12cm) Single-Sided Single-Layer, 5" (12cm) Single-Sided
Audio Output Level. . . . . 2 CH 2.0 Vrms @10kΩ
Characteristics . . . . . . . . (1) Frequency Response: 20 Hz - 20 KHz,
20
button to auto search
(CH+) button or
Double-Layer, (2) Compact Disc (CD-DA, Video CD), 5" (12cm) Disc
(2) Signal to Noise Ratio: 80dB (JIS)
(3) Wow and Flutter: Below Measurable Limits

TV Operation

Volume Adjustment
Press
^
player or VOLUME +/- buttons on the
remote to adjust the volume level.
Mute
Press the MUTE button to mute the
sound. Press the MUTE again or volume
up/down buttons on the front panel of
the unit or remote for sound to resume.
button
(CH+)

Specifications

/ ^
on the front panel of the DVD