Display Setup; Audio Setup - Movie Vision MV-DVD-PL5 Owner's Manual

DISPLAY SETUP

Open the Display Menu.
• TV Aspect sets the appropriate display
effect when wide-screen video material
is played on a conventional screen.
Choose from two options: 4:3 and 16:9.
• If Display Mode is set to 4:3 in the TV
Aspect you can choose from Letterbox
and Panscan modes.
- Panscan: Displays the picture in TV
mode with the left and right edges of
screen cut off.
- Letterbox: Displays the picture in cinema
mode with black bands across the top
and bottom of screen.
• When TV Output is selected it will output
in TV mode. The unit can play discs
recorded in either PAS or NTSC format.
- Select NTSC to connect to a NTSC TV.
- Select PAL to connect to a PAL TV.
- Select Auto format to automatically
format to the DVD disc format.
• For Video Output there is only one video
output mode S-VIDEO = CVBS.
18
Setup

AUDIO SETUP

Open the Audio Menu.
• Dolby Digital refers to dolby digital output.
- Bitstream: Choose this when using the
Dolby Digital Decoder, DTS Decoder
or MPEG Decoder, etc, to connect to
an amplifier or other devices
- PCM (Pulse Code Modulation): Select
PCM when connecting to an amplifier
with two channel digital stereo.
When playing a DVD disc with Dolby
Digital which was recorded by MPEG1
or MPEG2 the DVD player will output
the audio in PCM2 playback mode.
• In DTS (Date Transmission System)
there are two choices: Bitstream and
PCM.
• Choose On or Off for DRC (Dynamic
Range Control). In On mode you can lis-
ten to the film sound effects at lower
volumes without losing the sound defi-
nition.
• Choose Digital Output to activate the
digital audio output On or Off.