Table of Contents
Advertisement
Skipping Track
Press SKIP
or on the front panel during playback.
Press
to skip to next track and
to go back one track.
Note: For some VCD 2.0 (PBC-playback
control), may be unavailable.
Mute
Mutes the sound, while the disc continues
playing. When MUTE is pressed again,
sound will resume at previous level.
Volume Level Adjustment
Press
/
on the front panel of the unit
or VOLUME +/- on the remote to increase
or decrease volume level.
DVD Video Menu
When playing a DVD disc in the player:
1. Disc will play automatically and stop at
menu display.
2. Use NAVIGATION
the remote to and move the highlight bar in
the menu
3. Press ENTER to confirm selection.
Mode Selection
Press SOURCE on the front panel of the
unit or MODE on the remote to select
among DVD, TV and AV mode The indicator
on the front panel of the unit will illuminate
with the corresponding selection.
Basic Operation
on the remote control
,
buttons on
Reset
The RESET button is on the front panel of
the unit and must be activated with a ball
point pen or thin metal object. This button is
to be activated only for the following reasons:
• After the initial wiring installation of the
unit is complete.
• All the function buttons are not operating
correctly.
• An error symbol is displayed.
Last Play Memory
Press POWER
the unit. Press again to turn "On" the player.
The DVD player will resume playing from
the point that it stopped.
• While the disc is playing, press EJECT to
eject the disc, then reload the disc into the
player again, the player will resume playing
from the point that it stopped.
• While the disc is playing press SOURCE
or MODE to switch to TV or AV mode.
The player will resume playing from the
point that it stopped.
during play to turn "Off"
11
Advertisement
Table of Contents
