Brake-Shift Interlock Override - Ford 2015 Figo Owner's Manual

Recommended upshift speed when
accelerating using SelectShift mode (for
optimum fuel economy)
Gear Upshift
From
1
2
3
4
5
The instrument cluster will display your
currently selected gear.
Note: The transmission will automatically
upshift if your engine speed is too high or
downshift if your engine speed is too low.

Brake-Shift Interlock Override

WARNINGS
Do not drive your vehicle until you
verify that the brake lamps are
working.
When doing this procedure, you will
be taking your vehicle out of P (park),
which means your vehicle can roll
freely. To avoid unwanted vehicle
movement, always fully set the parking
brake prior to doing this procedure. Use
wheel chocks if appropriate.
If the parking brake is fully released,
but the brake warning lamp remains
illuminated, the brakes may not be
working properly. See your authorized
dealer.
Use the brake shift override to move the
gearshift lever from the park position in the
event of an electrical malfunction or if your
vehicle has a dead battery.
Figo (CDU) , E4B5 19A321 ZCA enIND, Edition date: 06/2015, Second Printing
Transmission
km/h
To
2 16 km/h
3 25 km/h
4 33 km/h
5 46 km/h
6 61 km/h
Apply the parking brake and turn the
ignition off before performing this
procedure.
E142193
1. Apply the parking brake and switch the
ignition off before carrying out this
procedure.
2. Remove the retaining screw.
3. Remove the right side center console
side panel.
4
E142214
4. Press the brake pedal. Using a suitable
tool rotate the lever forward while
pulling the transmission selector lever
out of the P (park) position and into
the N (neutral) position.
5. Install the console cover.
90
3 2