Novus NVIP-5000 series User Manual
  1. Manuals
  2. Brands
  3. Novus Manuals
  4. IP Camera
  5. NVIP-5000 series
  6. User manual

Novus NVIP-5000 series User Manual

Hide thumbs Also See for NVIP-5000 series:
Table of Contents

Advertisement

Quick Links

See also: User Manual
U s e r 's m a n u a l
NVIP-5000 series IP camera

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVIP-5000 series and is the answer not in the manual?

Questions and answers

Related Manuals for Novus NVIP-5000 series

Summary of Contents for Novus NVIP-5000 series

  • Page 1 U s e r ’s m a n u a l NVIP-5000 series IP camera...
  • Page 2 NVIP-5000 series user’s manual ver.1.0 IMPORTANT SAFEGUARDS AND WARNINGS EMC (2004/108/EC) and LVD (2006/95/EC ) Directives CE Marking Our products are manufactured to comply with requirements of the following directives and national regulations implementing the directives:  Electromagnetic compatibility EMC 2004/108/EC.
  • Page 3 NVIP-5000 series user’s manual ver.1.0 IMPORTANT SAFEGUARDS AND WARNINGS WARNING! THE KNOWLEDGE OF THIS MANUAL IS AN INDISPENSIBLE CONDITION OF A PROPER DEVICE OPERATION. YOU ARE KINDLY REQEUSTED TO FAMILIARIZE YOURSELF WITH THE MANUAL PRIOR TO INSTALLATION AND FURTHER DEVICE OPERATION.

  • Page 4: Table Of Contents

    NVIP-5000 series user’s manual ver.1.0 TABLE OF CONTENTS TABLE OF CONTENTS ..................... 4 1. START-UP AND INITIAL IP CAMERA CONFIGURATION ......... 6 1.1. Overview....................... 6 1.2. Starting the IP camera ................... 6 1.3. Initial configuration via the Web browser ............. 7 2.
  • Page 5 NVIP-5000 series user’s manual ver.1.0 FOREWORD INFORMATION 3.8.4. I/O Alarm Linkage................35 3.8.5. Alarm Setting..................36 3.9. Local Record...................... 38 3.9.1. Record Policy................. 38 3.9.2. Record Directory................40 3.10 Privacy Masking....................43 3.11. Network Service....................44 3.11.1.

  • Page 6: Start-Up And Initial Ip Camera Configuration

    1.2. Starting the IP camera To run NOVUS IP camera you have to connect ethernet cable between camera and network switch with PoE support. You can also connect it directly via power supply adapter with parameters compatible with camera power supply specification.

  • Page 7: Initial Configuration Via The Web Browser

    PC computer You can either set a network configuration (IP address, gateway, net mask, etc.) of NOVUS IP camera yourself or select DHCP mode (DHCP server is required in this method in target network) by using web browser or by NMS software.

  • Page 8: Network Connection Utilizing Web Broswer

    NVIP-5000 series user’s manual ver.1.0 NETWORK CONNECTION VIA WEB BROWSER 2. NETWORK CONNECTION VIA WEB BROSWER 2.1. Recommended PC specification for web browser connections Requirements below apply to connection with an IP camera, assuming image display in 1920x1080 resolution and 25 fps speed.
  • Page 9 NVIP-5000 series user’s manual ver.1.0 NETWORK CONNECTION UTILIZING WEB BROWSER If your computer has Flash Player installed, the main screen for the camera web interface opens. From here you can view and configure the camera. NOTE: If your computer does not have Flash Player installed, you will be prompted to select if you would like to use ActiveX or Flash Player to connect to the camera: ...
  • Page 10 NVIP-5000 series user’s manual ver.1.0 NETWORK CONNECTION VIA WEB BROWSER NOTE: If you are running Windows Vista/7/8 with Internet Explorer 11, the ActiveX applet can be blocked through browser security settings. In this situation, you should: add the IP address of the ca- mera to the view of compatibility (Tools ->...
  • Page 11 NVIP-5000 series user’s manual ver.1.0 NETWORK CONNECTION UTILIZING WEB BROWSER After making the changes, restart the browser, re-connect to the camera and log on. All rights reserved © AAT Holding sp. z o.o.

  • Page 12: Www Interface - Working With Ip Camera

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3. WWW INTERFACE - WORKING WITH IP CAMERA 3.1. Displaying live pictures 1.Camera settings Live Video - Live video preview Playback* - Playback records form SD card Device Info...

  • Page 13: Sensor Setting

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 2. Video Parameter Stream - Stream ID (choose one from available streams) Bite Rate Type - Bit rate type Bit Rate (kbps) - Bit rate I Frame Interval...
  • Page 14 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA In Image Adjust tab you can adjust brightness, saturation and contrast. NOTE: It has not effect when the Gain Mode and Shutter Mode is Fixed. In Shutter Control tab you can choose Shutter mode between AutoShutter or FixedShutter and adjust it’s parameters.
  • Page 15 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA In DayNightMode tab you can choose how the camera toggles between Day mode and Night mode. Set Auto to let the camera control that function automatically. Use Delay(s) bar to select time for delay switch between day and night mode.
  • Page 16 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA In WDR tab you can turn on or off WDR function. That function is available only in 3 MPx cameras. NOTICE: If you turn on WDR function, DSS will not work (available range of MaxShutter value will be between 1/25 and 1/50000)! In GAMMA tab you can choose gamma mode.
  • Page 17 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA In AE Meter Mode tab you can choose meter mode for AE function. Four modes are available:  Multi-Pattern - whole area is metered symmetrically with the same percentage.
  • Page 18 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA If WB Mode is set to Manual, choose it’s operating mode in Manual Mode box. Six modes for different operating environment are available: Overcast, Sunshine, Fluorescent light, Tungsten light, Lock the value and Customized.
  • Page 19 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA In Noise Filter tab you can adjust settings for the noise filter function. Set Mode to Auto to let the camera control this function automatically and adjust Max Level value.

  • Page 20: Playback Recordings From Sd Card

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.3. Playback recordings from SD card Playback menu allows to play recordings recorded by camera on SD card. 1. Preview window - displays recordings 2. Audio activations button - activates/deactivates listening to recorded audio 3.
  • Page 21 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA - Recording settings copy 4. Selecting time for the recordings - To start search select the beginning and end for time range. Then press button to find recordings. At time bar available recordings will be marked with green colour.

  • Page 22: Device Info

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.4. Device Info Device Info menu allows user to view information about camera and change the device name. To set DEVICE NAME, please click the box next to DEVICE NAME, type camera name and click the SET button.

  • Page 23: Stream Configuration

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.5. Stream Configuration Stream Configuration menu allows user to adjust settings of streams. CAMERA - Default number of the camera is 1. STREAM ID - Camera features up to 2 video streams that may be configured and run individually. This let you set a high quality recording stream and a lower quality stream for remote monitoring.

  • Page 24: Device Configuration

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.6. Device Configuration 3.6.1. Local Network Local network menu allows user to set IP camera address, subnet mask, default gateway, DNS and other network parameters. In IP PROTOCOL box you can choose between IPv4 and IPv6 protocols, that will be used to set LAN IP address.

  • Page 25: Device Port

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.6.2. Device Port Device Port menu allows user to change device port numbers. CONTROL PORT (the default is 30001) - for reading and writing settings, PTZ control, TCP audio and video port number.

  • Page 26: Adsl Network

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.6.3. ADSL Network ADSL Network menu shows the actual WAN network IP address. 3.6.4. Camera Camera menu allows user to change the channel name and video format. To set CHANNEL NAME, please click the box next to CHANNEL NAME, type any name and click the SET button.

  • Page 27: Date

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.6.5. Date Date menu allows user to change time zone, daylight and date settings. Time zone can be changed in TIME ZONE box. Default time zone is: (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb.

  • Page 28: Osd

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.6.6. OSD OSD menu allows user to set OSD parameters, for example which information will be displayed as overlay on encoded video steam. CAMERA - Default number of the camera is 1...

  • Page 29: Microphone

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.6.7. Microphone MICROPHONE menu allows user to adjust microphone settings. CAMERA - Default number of the camera is 1 ENABLE MICROPHONE - Turn on/off the microphone MICROPHONE VOLUME - set microphone volume from 0 to 100 3.6.8.

  • Page 30: Bnc Output

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.6.9. BNC Output BNC Output menu allows user to turn on or turn off the BNC output function. Set open to turn on the BNC output or set close to turn off the BNC output.

  • Page 31: External Device

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.7. External Device 3.7.1. PTZ Option not available. 3.7.2. PTZ Keyboard Option not available. All rights reserved © AAT Holding sp. z o.o.

  • Page 32: Alarm Configuration

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.8. Alarm Configuration 3.8.1. Alarm I/O In Alarm I/O menu you can set following alarm parameters: ALARM IN - Default number of alarm input ID is 1. NAME - to set the alarm input NAME, please click the box next to NAME and type any name from keyboard.

  • Page 33: Disk Alarm Linkage

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA NOTICE: Remember to turn on ENABLE I/O ALARM option (as well as set SCHELDULE) for alarm input and OUT CHANNEL option for alarm output in I/O Alarm Linkage tab (chapter 6.7.3.). Without that I/O alarms will not work.

  • Page 34: Network Alarm

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.8.3. Network Alarm In Network alarm menu you can define alarm recording on SD card when network connection is lost. Check Enable Network Exceptional Alarm checkbox and press OK button to enable network alarm.

  • Page 35: I/O Alarm Linkage

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.8.4. I/O Alarm Linkage In I/O Alarm Linkage tab you can turn on or off I/O alarm and configure I/O alarm schedule. ALARM I/O - Default number of I/O alarm ID is 1.

  • Page 36: Alarm Setting

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.8.5. Motion Alarm In Motion Alarm tab you can turn on or off motion alarm function and set motion alarm parameters. CAMERA - Default number of the camera is 1 ALARM INTERVAL - time after motion detection, for which the camera will not signal motion detection alarms.
  • Page 37 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA To set the motion detection area, press the MOTION AREA button. The following window will be displayed. Hold down the left mouse button and mark the region to add a mask area. When you need to remove the mask area, click the right mouse button.

  • Page 38: Local Record

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.9. Local Record 3.9.1. Record Policy In Record Policy tab you can set local recording settings. CAMERA - Default number of the camera is 1 To enable SCHDULE RECORD select ENABLE under it and choose one record mode: ...
  • Page 39 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA To set the schedule, press the SCHEDULE button. The following window will be displayed. Set the time, using buttons and press OK button. To enable any ALARM RECORD select ENABLE under ALARM RECORD text.

  • Page 40: Record Directory

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.9.2. Record Directory In Record Directory tab you can change SD memory card, NAS and FTP video parameters. Once configured, the device can record video directly to a SD card, NAS and FTP.
  • Page 41 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA After selecting FTP server and using MODIFY button, the following window will be displayed: Select ENABLE to activate recording video on FTP server. IP ADDRESS - IP address of FTP server.
  • Page 42 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA After selecting NAS server and using MODIFY button, the following window will be displayed: Select ENABLE to activate recording video on NAS. IP ADDRESS - IP address of NAS server.

  • Page 43: Privacy Masking

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.10. Privacy Masking In Privacy Masking tab you can set video covered area. The biggest support covered area is no more than 5% total image space. CAMERA - Default number of the camera is 1 Select ENABLE to activate private masking function.

  • Page 44: Network Service

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.11. Network Service 3.11.1. PPPoE In PPPoE tab you can enable PPPoE function. Select ENABLE PPPOE to activate PPPoE WAN access. USERNAME - account name PASSWORD - account password Through the client software set up correctly PPPoE.

  • Page 45: Service Center

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.12. Service Center 3.12.1. Alarm Center Function not available. 3.12.2. SMTP In SMTP tab you can enable, configure and test SMTP function. When SMTP is enabled, and event triggered by motion detection, alarm and/or I/O, alarm will be automatically sent with JPG picture and alarm information to the recipient's mailbox.

  • Page 46: Privilege Manager

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA Select ENABLE SMTP to activate SMTP function. SMTP SERVER ADDRESS - sender server address SMTP SERVER PORT - sender server port (depends on chosen transport mode) USER NAME - sender e-mail account name PASSWORD - sender e-mail account password SENDER E-MAIL ADDRESS - full sender e-mail address (for example: aat@novuscctv.com)
  • Page 47 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA To add new group press ADD button. The following window will be displayed. Type a group name in the GROUP box, press OK button, and then Confirm button.

  • Page 48: User

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.13.2. User In User tab you can add, modify or delete users. NOTICE: Default user root can not to be deleted. To add new user press ADD button. The following window will be displayed.
  • Page 49 NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA To modify the user settings select user from the list and press MODIFY button. The following window will be displayed. Change any of options, which are described in the Modify User section.

  • Page 50: Protocol

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.14. Protocol 3.14.1. Protocol Info In Protocol Info tab you can see the current protocol info name and version number. 3.14.2. Security In Security tab you can choose whether login/password is required when the equipment is connect via Onvif or RTSP protocols.

  • Page 51: Device Log

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.15. Device Log 3.15.1. Operation Log In Operation Log tab you can search, display and download operation logs. BEGIN TIME - start of search scope. Type it manually or click the button and set the date from the calendar.

  • Page 52: Alarm Log

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.15.2. Alarm Log In Alarm Log tab you can search, display and download alarm logs. BEGIN TIME - start of search scope. Type it manually or click the button and set the date from the calendar.

  • Page 53: Collect Log

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.15.3. Collect Log In Collect Log tab you can download full log file from the camera. To download full log file, press the COLLECT LOG button. Blue Download button at the bottom of the page will apear.

  • Page 54: Device Restart

    NVIP-5000 series user’s manual ver.1.0 WWW INTERFACE - WORKING WITH IP CAMERA 3.16.2. Device Restart In Device restart tab you can restart camera using remote control equipment. To restart the camera, press RESTART button and confirm that action using Confirm button.
  • Page 55 NVIP-5000 series user’s manual ver.1.0 NOTES All rights reserved © AAT Holding sp. z o.o.
  • Page 56 2014-08-29 MB, MM AAT Holding sp. z o.o., 431 Pulawska St., 02-801 Warsaw, Poland tel.: +4822 546 07 00, fax: +4822 546 07 59 www.novuscctv.com...

Table of Contents