Settings; My Vehicle; Appearance - TomTom Bridge Reference Manual

Settings

My Vehicle

Note: Route planning for a specific vehicle type is available only when a truck map is installed. If
a truck map is not installed, a car route is planned instead.
Select Settings in the Main Menu, then select My Vehicle.
On this screen, you can
Routes planned by your device avoid restrictions for the vehicle type, and take into account the
vehicle's specifications.
Vehicle Type

Select this setting to choose your vehicle type. When you select your vehicle, the following
details for your vehicle are shown:
Length / Width / Height

Weight / Max. axle weight

Maximum speed

For vehicle types Car, Taxi, Van and Other, the dimensions, weights and maximum speed are set
to zero. To change a setting, select it and enter a value that is specific to your vehicle. You can
also leave a setting at zero so it will not be used to determine restrictions when a route is
planned.
For vehicle types Bus and Truck, pre-set dimensions, weights and maximum speed are shown. To
change a setting, select it and enter a value that is specific to your vehicle.
Important: Settings that are set at zero will not be used to determine restrictions when a
route is planned.
HAZMAT

If your vehicle type is Truck and you are transporting hazardous materials, select this setting to
choose the type of hazardous material.

Appearance

Select Settings in the Main Menu, then select Appearance.
On this screen, you can change these settings:
 Switch to night colours when dark
Select this setting to make the device automatically switch to night colours when it gets dark.
Show previews of motorway exits

Select this setting to control the full screen preview when you approach motorway exits.
set your vehicle type and dimensions.
87