Returning To The Driving View; Setting The Volume; Quick Access Toolbar; Map Settings - TomTom Nav Reference Manual

Returning to the Driving View

To return to the Driving View at any time tap the return arrow in the top right corner of the screen:
To return to the previous screen tap the back arrow in the top left of the screen:

Setting the volume

Tap the driving instruction panel to show the volume control.
Move the slider from left to right to increase the volume of voices.
Move the slider all the way to the left to mute voices. When the sound is muted, the mute sound
indicator is shown in the driving instruction panel.

Quick access toolbar

Tap the quick access toolbar button to display the following options:

Map settings

You can change the way the map looks and behaves
map.
Tap this button to use a 2D map in the Driving View.
If the 2D map is being used, this button changes to a 2D symbol. Tap the
button again to use the 3D map.
Tap this button to switch off voice guidance. You will no longer hear spoken
route instructions but you will still hear information such as warnings.
If the voice is muted, this button changes to Enable Voice. Tap the button
again to turn voice instructions back on.
When voice instructions are disabled, the voice disabled indicator is shown
in the driving instruction panel.
Tap this button to use night colours on the menus and maps. If night colours
are being used, this button changes to a moon symbol. Tap the button again
to switch back to day colours.
as you drive, and change what you see on the
13