Switch map view
By default, automatic changing of views is on. This means, for example, that the device shows
the map view when an alternative route is being suggested, along with several other sets of
circumstances. Also, for example, that the device shows the guidance view when you start
driving and you start to accelerate. Select this setting if you want to turn off automatic chang-
ing between guidance view and map view.
Show current time
Select this setting to show the current time in the guidance view. When switched on, the
current time is shown at the bottom of
Guidance view
Select this setting to choose from 3D or 2D versions of the guidance view. Both the 2D and 3D
guidance views move in your direction of travel.
Theme Colour
Select Settings in the Main Menu, then select Appearance.
Select Change Theme to change the accent colour used in the menus, buttons and icons on your
navigation device.
Size of text and buttons
Select Settings in the Main Menu, then select Appearance.
Select Size of text and buttons to change the size of the text and the buttons you see on the
screen.
Note: This feature is only available on devices with a 6 inch / 15 cm or larger screen.
Drag the slider to change the text and button size to small, medium or large, then select Apply this
change. Your device restarts and applies the change.
Brightness
Select Settings in the Main Menu, then select Appearance.
Select Brightness to change the following settings:
Day brightness
Move the slider to adjust the brightness level of the screen during the day.
Night brightness
Move the slider to adjust the brightness level of the screen during the night.
the route
bar.
88