Route Features; Adding A Stop To Your Route From Your Current Route; Adding A Stop To Your Route Using The Map - TomTom Bridge Reference Manual

Shortest route - the shortest route to your destination. This may take much longer than the

fastest route.
Most eco-friendly route - the most fuel-efficient route.

 Avoid Motorways - this type of route avoids all motorways.
 Walking Route - this type of route is optimised for walking.
Bicycle Route - this type of route is optimised for bicycles.

You can set the default route type in the

Route features

You can choose to avoid some features that are on your currently planned route. You can avoid the
following route features:
Toll Roads

 Ferries and car shuttle trains
 Carpool Lanes
Unpaved Roads

Note: Carpool lanes are sometimes known as High Occupancy Vehicle Lanes (HOV lanes) and are
not present in every country. To travel on these lanes, you may need to have more than one
person in the car, for example, or the car may need to use environmentally-friendly fuel.
If you choose to avoid a route feature, a new route is planned.
In Route Planning in the Settings Menu, you can set how each route feature is handled when a new
route is planned.

Adding a stop to your route from your current route

1. In the Main Menu, select Current Route.
2. Select Add Stop to Route.
The map view is shown.
3. To select a stop, do one of the following steps:
Zoom in on the map, then press and hold to select a location. In the pop-up menu, select

Add to Current Route.
Select Search and search for a location. When you have found a location, select the Add

Stop to Route button.
Your route is recalculated to include your stop.

Adding a stop to your route using the map

1. Press the switch view button
Your complete route is shown on the map.
2. Zoom in on the map, then press and hold to select a location.
3. Select the pop-up menu button.
4. Select Use in Route.
5. Select Add to Current Route.
Your route is recalculated to include your stop.
Settings Menu.
to show the map.
67