Avoiding A Blocked Road; Types Of Route - TomTom Bridge Reference Manual

Change Route Type
Reorder Stops
Drive to Route
Play Route Preview
Stop Route Preview

Avoiding a blocked road

If there is a blocked road on your route you can change your route to avoid it.
1. In the guidance view, select the current location symbol or the speed panel.
Tip: The speed panel is only shown when you have started driving on your route.
2. Select Avoid Blocked Road.
A new route is found that avoids the blocked road. You may get shown up to two alternatives
depending on the road network between you and your destination.
The new route is shown on the map view with the difference in travel time in a balloon.
Note: It may not be possible to find an alternative route around the blocked road if none
exists.
3. Select the new route by selecting the time balloon.
4. Select Let's go.
Guidance to your destination resumes avoiding the blocked road. As soon as you start driving,
the guidance view is shown automatically.

Types of route

Select Change Route Type to change the type of route planned to your current destination. Your
route is recalculated using the new route type.
You can select the following types of route:
Fastest route - the fastest route to your destination. Your route is constantly checked taking

into account the traffic conditions.
Select this button to change the
Your route will be recalculated using the new route type.
Select this button to see the lists of stops for your current route. You can
then change the order of the stops on your route.
For a route without stops, you can also select this button to reverse your
route.
Select this button to plan a route from your current location to the
starting point of a My
Select this button to watch a preview of your planned route.
Select this button to stop the preview of your planned route.
type of route
Route. The starting point is converted to a stop.
66
used to plan your route.